• <code id="4iseo"><nav id="4iseo"></nav></code>
  • <blockquote id="4iseo"><u id="4iseo"></u></blockquote>
  • <xmp id="4iseo">
  • <bdo id="4iseo"></bdo>
  • 東莞市中制自動化設備有限公司
    DongGuan cnauto automation equipment Co Ltd
    position:home > valve

    ZZ-3535 rotary ceramic dispensing valve

    writer:點膠閥 time:2021-05-19 15:51 clicks:
    ZZ-3535 Ceramic dispensing valve is a kind of glue that can use particles. It is manufactured in a special way. There is no special device inside, but the device is externalized. There is only one stirring propeller inside. Rotating push, just like cement mixer, conveys glue by rotating. The glue with particles will not wear out the internal parts and will last for a long time.Ceramic spotting valves are also known as rotary spotting valves.
    Machine parameters
    Operating Viscosity: 1~3,000,000 CPS
    Vomiting volume: 0.01ml
    Operating pressure: 4-7kg/cm3
    Feed pressure: <30kg
    Operating frequency: <600min
    Feed spout size: 1/8"npt(f)
    Rubber outlet bore: 2.0mm
    Flow regulation: micrometer precision fine-tuning device
    Rubber valve core: ceramic core
    Shape size: (D) 35x (H) 97 (mm)
    Weight: 400g
    Control solenoid: 2-way 5-way/2-way 3-way available
    Installation screw: M5 internal screw
    Features and advantages
    1. You can use granulated glue.
    2. It still has good fluidity when using high viscosity glue.
    3. The rotating device can replace the air pressure and push the glue, which is of great help.
    4. Ceramic core is very difficult to wear and tear.
    Suitable glue type
    Granular glue, high viscosity silicone, sealant, black glue, yellow glue, lubricant, etc.